Cisco Switch 3560 - Password Recovery Procedure =============================================== Public domain ******************************************************************************** 1. Attach a terminal or PC with terminal emulation to the console port of the switch: Bits per second (baud): 9600 Data bits: 8 Parity: None Stop bits: 1 Flow Control: Xon/Xoff 2. Unplug the power cable. 3. Hold down the mode button located on the left side of the front panel, while you reconnect the power cable to the switch and bring it to the switch: prompt. 4. flash_init 5. load_helper 6. dir flash: 7. rename flash:config.text flash:config.old 8. boot 9. Enter "n" at the prompt to abort the initial configuration dialog. 10. enable 11. rename flash:config.old flash:config.text 12. copy flash:config.text system:running-config 13. change passwords: conf t enable secret enable password line vty 0 15 password login line con 0 password exit 14. write memory ******************************************************************************** _BY: Pejman Moghadam_ _TAG: catalyst-3560, password-recovery_ _DATE: 2014-01-06 09:26:40_